Tinjauan Literatur Sistematis Penerapan DMAIC dan DMADV di Industri Manufaktur

fattiya hamada sakti issa putri; bintang candra pradana; dita ameilya kusuma; febryan zidane adhani; galih ramadhan; ferdhika ariyansyah; fatur rahman ahmadi; febri dwi nur aziz

doi:10.26753/jitin.v1i2.996

Tinjauan Literatur Sistematis Penerapan DMAIC dan DMADV di Industri Manufaktur

fattiya hamada sakti issa putri, bintang candra pradana, dita ameilya kusuma, febryan zidane adhani, galih ramadhan, ferdhika ariyansyah, fatur rahman ahmadi, febri dwi nur aziz

= https://doi.org/10.26753/jitin.v1i2.996

Abstract views = 442 times |

views = 67 times

Abstract

Manufacturing company activities consist of several activities, one of which is management. The Process Management Framework includes activities to develop, improve and manage business processes in manufacturing companies. Some companies use some of the best methodologies to improve or develop existing processes and develop new ones. This literature aims to analyze the application of the Define, Measure, Analyze, Improve, Control (DMAIC) and Define, Measure, Analyze, Design, Validate (DMADV) methods in the Manufacturing Industry. The method used is Systematic Literature Review. These results indicate that the DMAIC and DMADV methods are methods that drive the pace of industrial economic growth, because they reduce process variability and improve product quality and prevent errors from occurring. However, this process requires trained and experienced personnel to meet the demand for product defect reduction. This method is the choice of industries that want to improve product quality and avoid mistakes, even though it takes a long time to implement, but almost all problems can be solved and improve processes in the manufacturing industry.

Keywords

DMAIC, DMADV, Badan Pusat Statistik, Manufacturing Industry

Full Text:

PDF

References

F. A. Ekoanindiyo, “Pengendalian cacat produk dengan pendekatan Six Sigma,” J. Ilm. Din. Tek., 2014.

F.-M. Su and C.-T. Su, “TFT-LCD Contrast Ratio Improvement by Using Design for Six Sigma Disciplines,” IEEE Trans. Semicond. Manuf., vol. 33, no. 1, pp. 128–139, 2019. DOI: 10.1109/TSM.2019.2956511

A. Liverani, G. Caligiana, L. Frizziero, D. Francia, G. Donnici, and K. Dhaimini, “Design for Six Sigma (DFSS) for additive manufacturing applied to an innovative multifunctional fan,” Int. J. Interact. Des. Manuf., vol. 13, no. 1, pp. 309–330, 2019. https://doi.org/10.1007/s12008-019-00548-9

F. Corchado Martínez, “Design for Six Sigma Using DMADV for Implementing Sewing Machine,” Manuf. Eng., 2019.

A. Baptista, F. J. G. Silva, R. Campilho, S. Ferreira, and G. Pinto, “Applying DMADV on the industrialization of updated components in the automotive sector: a case study,” Procedia Manuf., vol. 51, pp. 1332–1339, 2020. https://doi.org/10.1016/j.promfg.2020.10.186

A. V. Z. Bautista and M. I. Noroña, “Machine Productivity Improvement of the Test-To-Pack Process Line in the Production of SMD Power Inductors Using DMADV Approach and ProModel Simulation”.

M. F. Hassan, T. R. C. Mohan, I. Taib, S. Mahmood, and J. M. Kafuku, “Application of design for six sigma (DFSS) in sustainable product design: a case study on an electric kettle,” in IOP Conference Series: Materials Science and Engineering, 2019, vol. 607, no. 1, p. 12002. DOI 10.1088/1757-899X/607/1/012002

S. Kumar, R. Campilho, and F. J. G. Silva, “Rethinking modular jigs’ design regarding the optimization of machining times,” Procedia Manuf., vol. 38, pp. 876–883, 2019. https://doi.org/10.1016/j.promfg.2020.01.169

S. G. Bidikar, S. B. Rane, and P. R. Potdar, “Product development using Design for Six Sigma approach: case study in switchgear industry,” Int. J. Syst. Assur. Eng. Manag., vol. 13, no. 1, pp. 203–230, 2022. https://doi.org/10.1007/s13198-021-01199-4

M. T. Pereira, M. I. Bento, L. P. Ferreira, J. C. Sá, F. J. G. Silva, and A. Baptista, “Using Six Sigma to analyse Customer Satisfaction at the product design and development stage,” Procedia Manuf., vol. 38, pp. 1608–1614, 2019. https://doi.org/10.1016/j.promfg.2020.01.124

B. Bagaswara, F. D. Kartika, D. S. W. Habsari, and A. Dicha, “Analisis Perancangan Alat Bantu Drilling Penggurdian Pipa Menggunakan Metode DFSS dan Analisis SWO,” 2022.

C. Sithole, I. Gibson, and S. Hoekstra, “Evaluation of the applicability of design for six sigma to metal additive manufacturing technology,” Procedia CIRP, vol. 100, pp. 798–803, 2021. https://doi.org/10.1016/j.procir.2021.05.041

E.-A. Attia, K. Khader, and O. Nada, “Mistake Proofing Cam Mechanism Through Six-sigma Process: Case Study on Clothes Printing Machines,” Int. J. Eng., vol. 32, no. 3, pp. 438–444, 2019. doi: 10.5829/ije.2019.32.3c.12

D. M. Wu, C. K. P. Luk, and W. Z. Fei, “Quality control of low-cost electric machines for electric vehicles by DOE assisted six sigma DMADV method,” in 2017 7th International Conference on Power Electronics Systems and Applications-Smart Mobility, Power Transfer & Security (PESA), 2017, pp. 1–8. DOI: 10.1109/PESA.2017.8277740

L. K. Kaushik et al., “Mistake Proofing Cam Mechanism Through Six-sigma Process: Case Study on Clothes Printing Machines,” Int. J. Syst. Assur. Eng. Manag., vol. 13, no. 1, pp. 438–444, 2019. doi: 10.5829/ije.2019.32.3c.12

C.-C. Wang, H.-T. Chang, and K.-Y. Cheng, “Application of Six Sigma to Improve Smartphone Lens Holder Quality-An Empirical Study,” 2020. DOI: 10.12792/iciae2020.008

K. Purushothaman and R. Ahmad, “Integration of Six Sigma methodology of DMADV steps with QFD, DFMEA and TRIZ applications for image-based automated inspection system development: a case study,” Int. J. Lean Six Sigma, 2022. https://doi.org/10.1108/IJLSS-05-2021-0088

K. Knop, “Using Six Sigma DMAIC Cycle to Improve Workplace Safety in the Company from Automotive Branch: A Case Study,” Manuf. Technol., vol. 22, no. 3, pp. 297–306, 2022. DOI: 10.21062/mft.2022.040

L. K. Kaushik, “USE OF THE DMAIC METHODOLOGY TO OPTIMIZE DEFECTS IN PISTON CASTING”.

D. DIGA and I. SEVERIN, “BONNET CABLE DEFECT ANALYSIS USING SIX SIGMA DMAIC TECHNIQUES”.

Y. N. U. R. ANGGRAINI, “Usulan Penerapan Metode Six Sigma Dan Theory Of Inventive Problem Solving (Triz) Untuk Upaya Mengurangi Produk Defect Pada Proses Produksi Core Board Paper (Studi Kasus: Pt. Papertech Indonesia, Subang),” 2021.

K. Soundararajan, “Cost-reduction and quality improvement using DMAIC in the SMEs,” Int. J. Product. Perform. Manag., 2019. https://doi.org/10.1108/IJPPM-10-2018-0360

A. Rozak, C. Jaqin, and H. Hasbullah, “Increasing overall equipment effectiveness in automotive company using DMAIC and FMEA method,” J. Eur. des Systèmes Autom., vol. 53, no. 1, pp. 55–60, 2020. https://doi.org/10.18280/jesa.530107 A

M. I. Majid, M. R. Hashmi, and J. B. Gill, “Reduction of Faults due to Preventive Maintenance Non-compliance in Pakistan’s Glove Sector using DMAIC Approach,” 2020.

Y. D. R. Montororing, M. Widyantoro, and A. Muhazir, “Production process improvements to minimize product defects using DMAIC six sigma statistical tool and FMEA at PT KAEF,” in Journal of Physics: Conference Series, 2022, vol. 2157, no. 1, p. 12032. DOI 10.1088/1742-6596/2157/1/012032

A. S. Abualsaud, A. A. Alhosani, A. Y. Mohamad, F. N. Al Eid, and I. Alsyouf, “Using six sigma DMAIC methodology to develop a facility layout for a new production line,” in 2019 8th International Conference on Modeling Simulation and Applied Optimization (ICMSAO), 2019, pp. 1–5. DOI: 10.1109/ICMSAO.2019.8880335

A. Setyoko and T. S. Imaroh, “Effectivity of Digital Information Systems in improving the productions of Palm Oil Plantation using Six Sigma DMAIC (Case study in PT. Alam Plantase Indah),” Budapest Int. Res. Critics Institute-Journal, vol. 5, no. 3, pp. 22930–22943, 2022. DOI:https://doi.org/10.33258/birci.v5i3.6306

A. Trimarjoko, D. Saroso, H. Purba, S. Hasibuan, C. Jaqin, and S. Aisyah, “Integration of nominal group technique, Shainin system and DMAIC methods to reduce defective products: A case study of tire manufacturing industry in Indonesia,” Manag. Sci. Lett., vol. 9, no. 13, pp. 2421–2432, 2019. DOI: 10.5267/j.msl.2019.7.013

R. Godina, B. G. R. Silva, and P. Espadinha-Cruz, “A DMAIC integrated fuzzy FMEA model: a case study in the Automotive Industry,” Appl. Sci., vol. 11, no. 8, p. 3726, 2021. https://doi.org/10.3390/app11083726

I. Setiawan and S. Setiawan, “Defect reduction of roof panel part in the export delivery process using the DMAIC method: a case study,” J. Sist. dan Manaj. Ind., vol. 4, no. 2, pp. 108–116, 2020. https://doi.org/10.30656/jsmi.v4i2.2775

L. Girmanová, M. Šolc, J. Kliment, A. Divoková, and V. Mikloš, “Application of Six Sigma using DMAIC methodology in the process of product quality control in metallurgical operation,” Acta Technol. Agric., vol. 20, no. 4, pp. 104–109, 2017. DOI: 10.1515/ata-2017-0020

C. Sithole, K. Nyembwe, and P. Olubambi, “Process knowledge for improving quality in sand casting foundries: A literature review,” Procedia Manuf., vol. 35, pp. 356–360, 2019. https://doi.org/10.1016/j.promfg.2019.05.052

O. Makinde, R. Selepe, T. Munyai, K. Ramdass, and A. Nesamvuni, “Improving the Supply Chain Performance of an Electronic Product-Manufacturing Organisation Using DMAIC Approach,” Cogent Eng., vol. 9, no. 1, p. 2025196, 2022. https://doi.org/10.1080/23311916.2021.2025196

H. Kurnia, C. Jaqin, and H. Manurung, “Implementation of the DMAIC Approach for Quality Improvement at the Elastic Tape Industry,” J@ ti Undip J. Tek. Ind., vol. 17, no. 1, pp. 40–51, 2022. https://doi.org/10.14710/jati.17.1.40-51

S. Saryanto, H. Purba, and A. Trimarjoko, “Improve quality remanufacturing welding and machining process in Indonesia using six sigma methods,” J. Eur. SystèMes Autom, vol. 53, pp. 377–384, 2020. https://doi.org/10.18280/jesa.530308

A. O. Adeodu, M. G. Kanakana-Katumba, and R. Maladzhi, “Implementation of Lean Six Sigma (LSS) Methodology, through DMAIC Approach to Resolve Down Time Process; A Case of a Paper Manufacturing Company,” in Proceedings of the 2nd African International Conference on Industrial Engineering and Operations Management December, 2020, pp. 37–47.

N. S. B. Yusof, S. M. Sapuan, M. T. H. Sultan, and M. Jawaid, “Materials selection of ‘green’ natural fibers in polymer composite automotive crash box using DMAIC approach in Six Sigma method,” J. Eng. Fiber. Fabr., vol. 15, p. 1558925020920773, 2020. https://doi.org/10.1177/1558925020920773

H. Hargono, “Analisis Pengendalian Kualitas Proses Produksi Teh Dengan Metode Six Sigma Di Pt. Perkebunan Nusantara Viii Ciater.” Universitas Komputer Indonesia, 2020.

S. Ruwiyanto, R. Rizwan, T. Romadhon, and M. Fauzi, “Implementasi Lean Six Sigma Dalam Mengurangi Breakdown Maintenance Pada Sistem Automatic Length Control Di Pt Xyz Menggunakan Metode Dmadv,” J. Lebesgue J. Ilm. Pendidik. Mat. Mat. dan Stat., vol. 2, no. 3, pp. 342–350, 2021, doi: 10.46306/lb.v2i3.104.

N. Nandakumar, P. G. Saleeshya, and P. Harikumar, “Bottleneck identification and process improvement by lean six sigma DMAIC methodology,” Mater. Today Proc., vol. 24, pp. 1217–1224, 2020. https://doi.org/10.1016/j.matpr.2020.04.436

P. B. Ranade, T. R. Pathade, P. J. Ugale, D. S. Shende, and S. C. Pagare, “Defect Analysis and Implementation of DMAIC Methodology for Defect Reduction in Tyre Manufacturing,” Int. J. Innov. Res. Appl. Sci. Eng., vol. 3, pp. 479–482, 2019. DOI: 10.29027/IJIRASE.v3.i5.2019

R. Rodriguez Delgadillo, K. Medini, and T. Wuest, “A DMAIC Framework to Improve Quality and Sustainability in Additive Manufacturing—A Case Study,” Sustainability, vol. 14, no. 1, p. 581, 2022. https://doi.org/10.3390/su14010581

M. Y. Syafei and S. Louren, “Pengurangan Yellow Reject pada Proses Hexavalent Chrome Plating on Plastic dengan Menggunakan Pendekatan DMAIC,” 2020.

N. Jamil, H. Gholami, M. Z. Mat Saman, D. Streimikiene, S. Sharif, and N. Zakuan, “DMAIC-based approach to sustainable value stream mapping: towards a sustainable manufacturing system,” Econ. Res. istraživanja, vol. 33, no. 1, pp. 331–360, 2020. https://doi.org/10.1080/1331677X.2020.1715236

M. Sharma, S. Sharma, and S. Sahni, “Structured Problem Solving: combined approach using 8D and Six Sigma case study,” Eng. Manag. Prod. Serv., vol. 12, no. 1, pp. 57–69, 2020. https://doi.org/10.2478/emj-2020-0005

A. Ishak, K. Siregar, and H. Naibaho, “Quality Control with Six Sigma DMAIC and Grey Failure Mode Effect Anaysis (FMEA): A Review,” in IOP Conference Series: Materials Science and Engineering, 2019, vol. 505, no. 1, p. 12057. DOI :10.1088/1757-899X/505/1/012057

C. R. Abhilash and J. J. Thakkar, “Application of Six Sigma DMAIC methodology to reduce the defects in a telecommunication cabinet door manufacturing process: A case study,” Int. J. Qual. Reliab. Manag., 2019. https://doi.org/10.1108/IJQRM-12-2018-0344

A. A. T. N. Fahroni, S. Solihin, and D. Siregar, “Analisis Perbaikan Cacat Produk pada Proses Produksi Pensil dengan Tahapan DMAIC,” J. Ind. Eng. Syst., vol. 2, no. 2, pp. 128–135, 2021.

I. Daniyan, A. Adeodu, K. Mpofu, R. Maladzhi, and M. G. K.-K. Katumba, “Application of lean Six Sigma methodology using DMAIC approach for the improvement of bogie assembly process in the railcar industry,” Heliyon, vol. 8, no. 3, p. e09043, 2022. https://doi.org/10.1016/j.heliyon.2022.e09043